Description
White Low-Fire Piping Paste
• Comes in 4 oz. jar in the consistency of paste
• Satin finish
• Can be tinted with G series colors. Pro Tip: when tinting...remember you are adding color to a white base so you will end up with a pastel color.
• Can be brushed on, or piped on, when using squeeze applicator bottles with tips attached
• Can be used as an outline, since the piping paste is raised off the surface of the glass and creates a dam. Makes application of your color to the inside areas a cinch, without going over the outline.
• Can be used as a grout by applying a thin (transparent) application to glass, and pressing frit, buffalo chips (or any piece of glass) into the paste. The pastes' elasticity allows the use of different COEs on the same piece, without fracturing, when doing the grout technique. Test before doing a large piece.
• Can be used on glass, fired ceramic surface, wood, paper, craft surfaces and more!
• Firing range is between 1380 to 1550 along with other glass colors. The hotter it is fired the shiner it becomes.
• Paste cures or air dries in 24 hours when using on a non-fired surface.